Find you owners manual, it should say how to clean the button trap on your pump Unplug the machine FIRST! Get some towels, you will have water coming out. If the tub is full of water you will need to bale it out! Remove the lower front panel, usually two screws, look for the pump it will have hoses on it.
Now lay some towels around, expect water. Unscrew the end of the pump, if it has a button trap or lint filter. It will be on or near the pump refer to your owners manual If you dont have an owners manual you may find it at Samsung.com? May 03, 2008.
Specifications. Warranty: Sand Filter motor - 12 Months. Warranty: Sand Filter Casing - 12Months. Warranty: Control Valve - 12 Months. Warranty: Handle - 12 Months.
Warranty: Hoses and Accessories - 1 Month. Requires: Size 20 silica sand. 0.45 - 0.85mm Item No. 58271 Pump Flow Rate 2,006 l/h (530g/h) System flow Rate 2,006 l/h (530g/h) Certification 220-240v50Hz, 90W Weight CE/EMC Rating 7.4kg (16.3lb) Item No.
58257 Pump Flow Rate 3,785 l/h (1,000g/h) System Flow Rate 3,785 l/h (1,000g/h) Certification 220-240v50Hz, 90W Weight 12.2kg (26.8lb) Rating CE/EMC Item No. 58199 Pump Flow Rate 5,678 l/h (1,500g/h) System Flow Rate 5299 l/h (1,400g/h) Certification 220-240v50Hz, 90W Weight 14.3kg (31.5lb) Rating CE/EMC Item No. 58286 Pump Flow Rate 4,542 l/h (1,200g/h) System Flow Rate 4,164 l/h (1,200g/h) Certification 220-240v50Hz, 90W Weight 15.2kg (33.5lb) Rating CE/EMC Item No. 58315 Pump Flow Rate 7,571 l/h (2000g/h) System Flow Rate 6,814 l/h (1800 g/h) Certification 220-240v50Hz, 90W Weight 14.9kg (32.9g/h) Rating CE/EMC. Reasons Solutions Sand is too small Recommended 0.45mm to 0.85mm #20 Silica Sand Moved the control valve and performed the back flush to the filter function without stopping the sand filter Stop the sand filter before setting the control valve The skimmer is broken Replace the skimmer The level of the sand is too high Check the level of the sand is between the marks MAX and MIN on the hub (4-5cm under the top of the tank) No back flush and rinsing has been performed Perform the back flush and rinsing procedure, especially when the sand is new.
Reasons Solutions The ozone generator has reached its life span Go through checklist guide, if this does not resolve the problem, the pump will need replacing. Replacements can be purchased from or Control valve is not set to filter function Set the control valve to filter function Hoses are broken and there is no water flow Replace the hoses. Replacements can be purchased from or No water flow Go through checklist guide, if this does not resolve the problem, the pump will need replacing. Replacements can be purchased from or Dirty filter Perform the back flush procedure. If the pressure reading on the pressure gauge is 0.045 MP (6.5 PSI) or higher or the water flow to the pool is too low it could be the time to clean the sand.
Please check the following: If there is any blockages in the hoses If the connection valves are closed or partially closed After having checked the above conditions, please follow the instructions on the manual to perform backwash and rinsing. If after having performed them, there is still a high-pressure reading, sand bed replacement is necessary.
Flowclear Filter Pump Manual
FEATURES:. Pumps 1500gal/h (5,678L/h) of water.
For use with 1,100-42,300 L (300-11,200 gallons) pools.
. #58199 220-240V50Hz, 300W Hmax 1.5m Hmin 0.19m IPX5 Inflate Your Fun Illustration non contractual FLOWCLEAR Sand Filter Owner’s Manual www.bestway-service.com D版: S-S-001458 英. P6540 hot weather and/or exposure to sun. O-ring P6149. Please examine and verify all sand filter components are present before use.
Notify Bestway at the Piping P6560 customer service address listed on this manual for any Strainer Cover P6561 damaged or missing parts at the time of purchase. CONTROL VALVE OVERVIEW WARNING: To prevent equipment damage and possible injury, always switch off sand filter before changing the Control Valve function.
Changing valve positions while the pump is running can damage the Control Valve, which may cause personal injury or property damage. How to Use the Control Valve Press down on the Control Valve handle and rotate to desired function. Section II: Hose Configuration for Backwashing and Rinsing NOTE: Ensure the Control Valve is set to the Closed function. Your pool should be filled with water. Attach one Hose to the sand filter’s Port B; screw the threaded locking ring into position.
Before sending the control valve, please contact your after sales center for instructions. Bestway is not responsible for economic loss due to water or chemical costs. With the exception of replacement product, the results of leak are not Bestway responsibility. Bestway will not place any products deemed to have been neglected or having been used outside of the owner’s manual guidelines. E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] www.bestway-uk.com The Netherlands Belgium & Luxembourg Bestway Central & South America Ltda Tel: 9 Tel: 0 800 20 132 Salar de Ascotan 1282, Parque Enea, Fax: (+31) 887878969 Fax: (+32) Pudahuel, Santiago, Chile E-mail: [email protected].
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |